Navyug Enterprises

KU760 Cut off Saw is suitable for the hardware processing, decoration and pipeline construction. It provides the high precision and smooth cutting.

Unique 2200W high power motor, strong overload capability
High quality large contact switch, longer service life
Patented rapid positioning structure, better precision
Reinforced protective cover and anti-spark plate design, safer use
Up to 3950rpm no-load speed, higher efficiency
Quick release material clamping system, no slippery
Large table size and light weight stamped steel base, sturdy and stable
Horizontal handle for more comfortable operation

• Kress KU730 7 inch Angle grinder with ​​​​​​2200W robust power and 4000W max output power deliver 10% higher efficiency in its class 

• Optimum stone processing : robust, powerful angle grinder with gear reduction and adjustable speed for material-friendly working

• Spindle dust-proof and waterproof design 

• Efficient cooling system provides a continuous supply of fresh outside air for protecting the motor from burning due to excessive temperature

• Durably constructed shell with insulation protection offers stable and safe service

• Ergonomic design provides outstanding grip experience 

• Compact and lightweight design provide maximum user control

• Compact gear case allows use in tight and confined areas

• ​​​​​Adjustable nozzle and turbo nozzle tackle a variety of cleaning tasks: homes, buildings, RVs, cars, boats, decks, driveways, lawn equipment, and more

• Powerful 1400W motor generates up to 10.5MPA water flow and can remove tar and grease from concrete, heavy mildew stains, oil stains, rust from steel, caked mud on equipment, and other stubborn gunk and grime.

• Lightweight and wheeled design for portability

• Security lock prevents accidental touching and misuse by children

• Auto start-stop wnd hood prevents water from splashing into the motor during use and ensures safety

• Professional air duct design prolongs motor life

• SDS chuck for easy plug-in assembly

• Mechanical variable transmission (0-3000 RPM) for a wide range of drilling and fastening applications

• Robust motor delivers max drilling capacity of 30mm in wood

•  Machined stainless stee gears engineered for maximum job site durability

• Compact and ergonomic design at only 281mm long

• Weighs only 1.7kg for reduced operator fatigue

• Rubberized soft grip handle provides increased comfort on the job

• Mechanical variable transmission (0-2800 RPM) for a wide range of drilling and fastening applications

• Robust motor delivers max drilling capacity of 20mm in wood,10mm in steel and aluminum

• All metal gears engineered for maximum job site durability

• Compact and lightweight design provides easy maneuverability 

• All metal keyless chuck for improved bit gripping strength and durability

• Ideal solution for tight cornersand continous overheading tasks 

• Rubberized soft grip handle provides increased comfort on the job

• Fast and precise cutting of tubes, profiles, metal grids and sheets, free from sparks and burrs

• Cutting depth control, steplessly adjustable and without tools 

• Powerful 1400W motor delivers 5200-RPM for greater speed and faster cuts

• The compact circular saw has the maximum depth of cut of 64mm at a 90 degree

• High strength and lightweight magnesium shoe provides jobsite durability for long-term cut accuracy

• Optimized rubber overmolded comfort grip delivers optimal balance and control

• Tool-less blade change lever allows for faster blade installation and removal 

• 350W delivers plenty of power for drilling/driving into a range of materials

• Strong load capacity for light, medium and heavy workload

• 10mm keyless chuck designed for greater bit retention of the corded drill

• Corded drill offers unlimited runtime for even the biggest jobs

• Lightweight and compact, perfect for smaller and higher spaces

• Stepless speed regulation for enhanced control of all projects

• Long service lifetime

• Up to 600 ℃ maximum output temperature 

• 2 stages air flow with max of 330-380L/min

• Tool stops working automatically when temperature reaches the limit 

• Hot wind shield prevents high temperature from burning hands

• Anti-slip switch and rubberized handle to make work more convenie

• This die grinder is backed by a powerful 450 W motor that generates heavy torque

•  A no-load speed of 33000 rpm provides instant cuts and smooth finishes

• Robust 6mm collet that provides shake free support to the wheel

• This spindle thread offers sturdy hold to the rotating disc

• The lock-off switch prevents accidental start-up to ensure user safety

•  Ergonomic structure offers a comfortable hand grip for high precision control

• Long service life due to dust-proof design for the complete machine

• Ultrafine handle design takes comfortable grip

• Kress KU707B 4 inch (100mm) Angle Grinder with Powerful 830W motor for faster cutting and grinding
• 172mm slim body design, more comfortable to grip
• Long service life, dustproof for the whole machine
• Rear on & off switch
• Carbon brush with coli spring structure
• Optimized transmission ratio, higher output efficiency
• Uitrafine handle design, comfortable to grip
• Efficient internal cooling is engineered for optimum performance
• Metal housing and gearing system provides legendary durability

• Powerful 850w motor delivers excellent drilling capacity of 30mm in wood, 26mm in concrete and 13mm in steel

• Variable speed of 0-1250 RPM, adjustable impact rate of 0-5500 BPM and 3J impact energy provide better control in wide range applications 

• SDS-Plus chuck allows for easy and secure bit changes to improve working efficiency

• Overload protection  designed to protect the motor from burnout in abnormally high torque situations

• Variable speed trigger enables user to match the speed to the application

• Large air cylinder fastens heat dissipation to prevent the motor from excessive temperature

• Anti-vibration technology actively works to reduces vibration to fingers and the motor

• Rubberized overmould grip brings best in class grip experience

• Compact and Lightweight design is ideal for continous work and one hand use 

• This 1050W demolition hammer should be applied to  trenching, breaking concrete, chipping off concrete, grooving, bar cutting, and driving piles in the installation of piping and wiring, sanitary facility installation, machinery installation etc.

• Powerful 1050W motor and durable German-engineered mechanism for efficient performance and runtime.

• 14J impact energy provides powerful impact to tough applications

• The efficient cooling system provides a continuous supply of fresh outside air for protecting the motor from burning 

• HEX quick change system

• Ergonomic rubberized soft-grip handle

• Lock on switch

• Overheating and overloading protection

• Robust cast aluminum housing for drive unit and motor

• Ergonomically shaped, slim handle with large speed control trigger

• Protection mechanism is engineered for improved dust and water resistance for operation in harsh conditions

• Anti-vibration technology internally counterbalances and absorbs vibrations

• Powerful 1200w motor delivers 3500 RPM, and 14J impact energy to handle the most demanding applications

• Well-sealed protection from oil-leakage

• SDS-max chuck system provides for tool-free bit changes

• Tool Length shortening and innovative lightweight for over-head continuous work

• Rubberized Overmould grip for less fatigue and more comfort

• Durable carbon brushes deliver extended tool life

• Robust 1050w motor produces max bpm of 3950 and 500bpm

• Large drilling capacity of max. 38mm in masonry

• Constant speed control automatically applies additional power under load for optimum performance

• Overload protection is designed to protect the motor from burnout in abnormally high torque situations

• Auto-stop system electronically turns off the motor if rotation of bit is suddenly forced to stop

• Anti-vibration technology is designed to reduce vibration for increased comfort

• Ergonomic rubberized soft-grip handle with large multi-finger trigger provide increased comfort

• Powerful motor delivers 1700W surging power

• Anti-vibration and rubble switch handle

• Lock-on switch prevents long-time pressing

• 56mm large diameter  precision cylinder provides high impact force

• Quality hexagonal HEX chuck clamps pickaxes tightly

• Wear resistant and shatter resistant tool cast by aluminum alloy

• Motor works in low temperature with large air outlet and delivers good heat dissipation

• High-carbon powder metallurgical gear for better durability

• Three functions: hammer drill, chisel, and rotating 

• Powerful drilling capacity of 26mm in masonry 

• 1100w powerful motor delivers 900rpm and 4300 max bpm and an impact energy of 5J

• Variable-speed control dial enables user to match speed to application for greater versatility

• The anti-vibration handle reduces the vibration

• High performance hammer action, precisely mounted in a housing made of aluminum alloy

• Relieve the load on the machine immediately and allow cooling for approx. 30 seconds

KU711 provides high productivity and the outstanding user protection.

• High-efficiency 1100W motor

• MSC air-duct design rapidly cools the motor

• Long service life: dust proof design for the complete machine

• Kress KU700X 4 inch (100mm) Angle Grinder with Powerful 760w motor delivers 12000 RPM for optimum performance in high demand applications

• Power trigger comes equipped with lock-on feature for continuous operation and lock-off feature

• Reinforced metal gear housing engineered for maximum job site durability

• Compact and ergonomic design at only 1.3kg

• Rubberized soft grip provides increased comfort on the job

• Back switch with spindle lock for operator convenience

• Efficient internal cooling is engineered for optimum performance

• 650W power-intensive machine for professionals;
• Top level
• Rubberized housing,
• robust components.

650W power professional machine for heavy work;
Single grade machine with top level for easy work;
Rubberized, light and ergonomic housing;
Robust internal parts with reinforced shaft bearings.

• Additional information

Our KU076 Tile Cutter with 1400W high power motor, provides 13000rpm speed and big torque output, together with adjustable angle design is adapted to a variety of working conditions.

1. 1400W high-power protected motor

2. 0-45° adjustable angle design

3. Dust proof and waterproof gearbox

Additional Information:

• Delivery Time: Readily available
• Packaging Details: Box

Variable speed with reverse

Forward/Reverse rotation control

Convenient 10mm keyless chuck for quick bit changes

38N.m torque output meets various working conditions demand

Battery protection circuit protects against overloading, over-discharging and over-heating

Variable 2-speed (0-450 & 0-1,700 RPM) for a wide range of drilling and fastening applications

• 18+1 Clutch settings

• 50N.m torque output meets various working conditions demand

• Large drilling capacity of 35mm in wood and 13mm in steel

• Variable 2-speed (0-450 & 0-1,800 RPM) for a wide range of drilling and fastening applications

• Increased motor power for higher application speed and max tightening torque

• Best possible ergonomic handle for drilling applications

• Ergonomically designed handle with soft grip provides increased comfort

• 20V max slide battery design enables the tool to stand on its own for user convenience

• Compact and ergonomic design at only 1.16kg

• Built-in LED light with pre-glow and afterglow functions illuminates the work area

• Convenient 10mm keyless chuck for quick bit changes

• Battery protection circuit protects against overloading, over-discharging and over-heating

• 190 MPH air speed and 2.8m³/min CFM air volume for sweeping leaves, clearing roof shingles, dusting garages

• Innovative axial fan design of the cordless blower that maximizes on air output and run time

• Low noise design allows for quiet operation

• Ergonomic and Labor saving design handle with smooth and soft rubberized cover

• Variable trigger and speed lock for precise power control

• Drilling, Hammering, & Chisel, three functions in one 

• Compact and lightweight design to fit one hand over-heading use and great control

• Power brushless motor delivers 2.0J impact energy

• Variable speed and impact rate control (0- 1350RPM and 0- 4700BPM)

• Dual safety clutch protections brings more safety

• Overload protection protects the motor from burnout in abnormally high torque situations

• Anti-vibration technology reduces injury during working.

• Soft grip handle is designed for less fatigue and more precise control

• 20+1 Clutch settings and drill mode for added fastening control

• 38N.m torque output meets various working conditions demand

• Large drilling capacity of 20mm in wood and 10mm in steel

• Variable 2-speed (0-450 & 0-1,700 RPM) for a wide range of drilling and fastening applications

• Increased motor power for higher application speed and max tightening torque

• Best possible ergonomic handle for drilling applications

• Ergonomically designed handle with soft grip provides increased comfort

• 12V max slide battery design enables the tool to stand on its own for user convenience

• Compact and ergonomic design at only 0.9kg

• 156mm tool length for narrow and tight spaces

• Convenient 10mm keyless chuck for quick bit changes

• Battery protection circuit protects against overloading, over-discharging and over-heating

The Palm router can work efficiently, is good to hold and control, and has a long service life.

• 550W high-power motor and 33000 RPM speed for strong power and efficient operation
• Dustproof switch + Mazed dustproof structure, double protection to prevent dust into bearing, hence longer service life
• High coaxiality of housing and motor + optimal matching of air duct and blade, quieter operation and lower noise

• Lightweight blower for blowing off chips from workpieces, workplace, transporter etc.

• Good ergonomics provided by a comfortable rubberized handle and excellent balance thanks to optimum center of gravity

• Robust design suitable for applications in the workshop and on the construction site

• Thumbwheel for preselection of air rate settings for flexible use

• Rubberized end piece of the blow tube to protect delicate surfaces

• Comfortable blowing of floor areas using the supplied extension of the blow tube

• Low noise level and smoother airflow

• High water-resistance allows to operate the machine

• Zero emissions and reduced maintenance

• Brushless motor: longer runtime, greater power & increased motor life

• Maximum 300Nm torque

• Auto stop reverse rotation stops rotation after loosening bolts

• Variable 3 mode gear control (2 speed + auto stop)

• Intelligent power supply prevents battery overload, overheating, and excessive discharge

• Powerful brushless motor delivers extended runtime and increased productivity

• 2-speed (0-450/0-1800 /min ) setting provides a wide range of drilling and fastening applications

• 20+1+1 clutch 

• The 10mm keyless chuck allows to quick bit change and accepts most bits

• Robust drilling capacity of 35mm in wood, 13mm in steel 

• Compact and lightweight design provides best access to tight spaces

• Built-in LED light illuminates the work area

• Ergonomically designed handle with soft grip provides increased comfort

• Battery protection circuit protects against overloading, over-discharging and over-heating